Refinishing hardwood floors is something you can do yourself. You don’t actually have to burn a hole in your pocket to complete such a project. You must understand this task may require you to dedicate a lot of your time if you want to get the best results.
Refinishing wood floors without sanding is also possible and can be done with the proper instructions. Before finishing hardwood floors, you must remove all the carpets and furniture lying on the ground. You can also use a mask so you can avoid inhaling dust while you finish hardwood floors.
As you learn more about finishing hardwood floors, you will understand that the old wood floors can be restored to their original form. You can also get valuable advice on this subject in books and on the internet.
The first step is to clean the entire floor that you want to refinish. You must then use a damp cloth to thoroughly clean the area. Remove the attachment strips, glue and carpet. You have to fill in the large holes with wood pulps.
The next step is to fix the cracks and holes on the floor. You must use a matching shade for larger holes so that it blends with the surrounding wood flooring. This is followed by polishing the area with a floor polishing machine. Fine grade sandpaper is used to treat the corners because the machine may not be able to reach these areas properly.
Once the polishing process is complete, the whole area can be cleaned gently with a soft cloth and mild detergent. The next step is the application of polyurethane resin. This should be left to dry for at least 10 hours before putting the furniture and carpet back in the room.
Refinishing hardwood flooring will not be too expensive if you skip the sanding process. Some professionals apply a chemical especially when sanding hardwood floors. This process involves the application of a compound or chemical solvent followed by priming and painting. This method is ideal for small areas of finish hardwood. Check out more at Ask The Renovator where you can also learn the best way to remove wallpaper.